|
Technical Data |
Application Instructions |
Coating Film Performance |
|
Color: Pure black, black, glittering silver, grey, and golden yellow etc |
Base materials: Aluminum, die-casting aluminum, aluminum alloy, cast iron pots etc. |
Adhesiveness: 100mm, passed |
|
Viscosity: ¡Ý30 seconds (Iwata cup No.2, 25¡æ) |
Base material treatment: sand blasting or galvanic corrosion |
Solvent resistance: ¡Ý100 cycles of friction, the base is not seen. |
|
Non-volatile matter: 28%¡À2 |
Application method: Automatic air spray or manual application |
Pencil hardness: ¡Ý1H-2H (Mitsubishi, Japan) |
|
Specific gravity: About 0.98g/cubic centimeter |
Thinner: YJN3008 dedicated thinner |
Salt water resistance: 3.5%NaCl salt water test; exceeds 24 hours. |
|
Coating thickness: Recommended thickness is10 to 20 microns |
Curing temperature: 380-400¡æ/5-10 minutes |
Inadhesion: 500 cooking cycles, passed smoothly
3 to 5 eggs are fried, passed |
|
Storage life: Room temperature 25¡æ to 30¡æ for 6 to 12 months in original package |
|
Thermal endurance: 220¡æ, heat preservation for 24 hours, passed |
|
|
|
Acid boiling resistance: Boiling 12% muriatic acid reagent for 10 minutes without damaged |
|
|
|
Oil resistance: Soaked in 220¡æ peanut oil for 2 hours without damage |
