|
Technical Data |
Application Instructions |
Coating Film Performance |
|
Color: Pure black, black with silvery glittering, grey with silvery glittering etc. |
Base materials: Aluminum, die-casting aluminum, aluminum alloy, iron and soft steel etc. |
Adhesiveness: 100mm/100mm, passed |
|
Viscosity: ¡Ý40 seconds ¡À2 (Iwata cup No.2, 25¡æ) |
Base material treatment: Zinc coat phosphating, sand blasting or galvanic corrosion |
Solvent resistance: MEK¡Ý100 cycles of friction, the base is not seen. |
|
Non-volatile matter: ¡Ý45%¡À2 |
Application method: Static spraying, automatic air spraying or manual application |
Pencil hardness:¡Ý3H (Mitsubishi, Japan) |
|
Specific gravity: About 1.03g/cubic centimeter |
Application viscosity: 10 to 11 seconds for automatic spraying, 14 to 16 seconds for manual application. |
Salt water resistance: 3.5%NaCl salt water test; exceeds 24 hours. |
|
Coating thickness: Recommended thickness is15 to 25 microns |
Thinner: 40%Xylene+30%CAC+10%BCS+20%BA |
Inadhesion: 15¦Ìm coating, tape test: passed smoothly; egg frying test, 3 to 5 eggs: passed. |
|
Glossiness: 20-500 |
Curing temperature: 280-290¡æ/5-10 minutes |
Washability: No damage marks (3% detergent, 100¡æ, 30min) |
|
Storage life: Room temperature 25¡æ to 30¡æ for 6 to 12 months in original package |
|
Thermal endurance: 220¡æ, heat preservation for 24 hours, passed |
|
|
|
Chicken roasting test: passed |
|
|
|
Drop weight test: £¾4.9KJ |
